MAKE IN INDIA
Advance Paints delivers robust anti corrosion coatings engineered for the punishing realities of oil and gas environments, where heat, chemicals, and constant exposure test every surface. Our specialized formulations resist acids, alkalis, solvents, and aggressive atmospheres, protecting tanks, pipelines, and process equipment for years. Trusted by leading refineries and petrochemical plants including HPCL, BPCL, ONGC, and MRPL, our solutions meet stringent EIL specifications and perform reliably in critical, high risk operating conditions.
Products
Advochlor 1231 Zinc Phosphate Primer
Specification No. : P-2
Advochlor 1231 Zinc Phosphate Primer is a single-pack, modified plasticized chlorinated rubber-based paint containing selected inert pigments. It is intended for use as a primer in solvent-based interior and exterior systems and offers excellent adhesion, along with chemical, impact, and weathering resistance.
Advowash 1211 Etch Primer
Specification No. : P-4
Advowash 1211 Etch Primer is a two-pack, phosphoric acid-cured etch primer that complies with IS: 5666-1970. It is designed to provide excellent adhesion and flexibility on aluminium, galvanised iron, and light alloy surfaces, serving as a base for subsequent coating systems.
Advoguard 1250 Zinc Phosphate Primer
Specification No. : P-6
Advogurard 1250 ZHP is a two-pack anti-corrosive epoxy zinc phosphate primer. It is designed for use on structural steel, pipelines, and metal surfaces located in severe industrial and marine environments.
Advothane 3345
Specification No. : F-2
Advothane 3345 is a two-component acrylic polyurethane coating with a full-gloss finish, designed for durability in industrial and marine environments. It is suitable for steel structures, pipelines, machinery, and vehicles, offering resistance to gasoline, petroleum, and oils.
Advochlor 3341
Specification No. : F-3
Advochlor 3341 is a chlorinated rubber-based finish paint that offers optimum gloss and resistance to wear, impact, acids, and alkalis. It is recommended for use in mild to moderate corrosive marine or industrial atmospheres, such as pipelines and structural steel.
Advoguard 3360 HB PNE
Specification No. : F-6A
Advoguard 3360 PNE is a high-build, epoxy amine adduct-cured coating designed for the interiors of storage tanks, silos, and cargo-holds. It offers excellent resistance to aliphatic and aromatic hydrocarbons, acids, alkalis, and ketonic solvents.
Advoguard 3360 HB MIO PDE
Specification No. : F-6B
Advoguard 3360 HB PDE is a high-performance, two-pack, high-build modified epoxy intermediate coating. It is designed for protecting steel structures, pipes, and oil rigs in marine and highly corrosive conditions as well as offers excellent chemical and solvent resistance.
Advoguard 3390 Solventless Epoxy
Specification No. : F-6C
Description goes here.
Advoguard 3660 СТЕ
Specification No. : F-7
Advoguard CTE 3660, a rust-encapsulating, two-pack coal tar epoxy coating with an amine hardener. It is designed as a tough, flexible, water-repellent coating for storage tank bottom plates, piling, and other marine-environment areas in contact with soil.
Advamastic 1280
Specification No. : F-8
Advamastic 1280 HB is a high-solids, polyamide-cured, self-priming epoxy coating designed for high corrosion resistance. It exhibits excellent adhesion to old, aged coatings and is suitable for both new and rusty structures in severe corrosive environments, including marine settings.
Galozinc 1180
Specification No. : F-8
Galozinc 1180 is a two-component, high-build inorganic zinc and ethyl silicate primer, formulated with 80% metallic zinc by weight in the dry film. Designed for corrosion protection in humid and corrosive atmospheres, it is suitable for steel structures, pipelines, pressure vessels, and marine installations.
Advolite Aluminium HR 3125
Specification No. : F-11
Description goes here.
Advotherm HHR 3160 Aluminium
Specification No. : F-12
Advotherm HHR 3160 is a single-pack, high-heat-resistant silicone coating pigmented with aluminium flakes, designed to protect steel surfaces operating at temperatures up to 600°C. It is not suitable for use if the skin temperature is below 300°C.
Advoguard 3670 СТЕ
Specification No. : F-14
Advoguard CTE 3670 is a two-pack high-build coal tar epoxy coating, cured with an amine hardener, designed to protect steel and concrete structures in marine, acidic, and alkaline environments.
Advoguard 3370 PHE
Specification No. : F-15
Advoguard 3370 PHE is a high-build, highly cross-linked epoxy phenolic coating designed by Advance Paints to protect steel structures, particularly those beneath thermal insulation, that are subject to wet and dry cycling.
Advoguard 3390 PE
Specification No. : F-17
Description goes here.
Galozinc 1180
Galozinc 1180 is a high-build, two-component inorganic zinc ethyl silicate primer. It contains 80% metallic zinc by weight in the dry film, providing cathodic protection to steel surfaces in corrosive and humid environments.
Galozinc 1130
Galozinc 1130 is a two-component, moisture-cured zinc silicate weldable pre-fabrication primer. It is compliant with IS 14946 and is free from organic compounds, making it suitable for applications requiring excellent cutting and welding properties.
Advoguard 1255
Advoguard 1255 HB ZHP is a two-pack epoxy zinc phosphate primer designed for corrosion protection. It is reinforced with inert and lamellar extenders, suitable for structural steel, pipelines, and marine superstructures in severe chemical and marine environments.
Advoguard 2285 HS MIO
Advoguard 2285 is a high-performance, two-pack modified epoxy coating. It is a high-build, high-solid coating reinforced with inert and lamellar pigments, designed for superior chemical and solvent resistance.
Advoguard 2260
Advoguard 2260 HB is a two-pack, high-performance, high-build modified epoxy coating. It is designed for the protection of steel structures, pipes, and oil rigs operating in highly corrosive and marine environments.
Advoguard 3350
Description goes here.
Advothane 3350
Advothane 3350 is a two-component acrylic polyurethane coating designed for high-gloss finishes and long-term durability in severe marine and industrial environments.
Advoguard SP 80
Description goes here.
Advoguard 1190 HB
Advoguard 1190 HB is a high-build epoxy zinc-rich primer.General It is a two-component primer containing over 90% zinc in the dry film, providing cathodic protection against corrosion in severe saline and corrosive environments.
Advoguard 3660 СТЕ
Advoguard CTE 3660 is a two-pack, rust-encapsulating coal tar epoxy cured with an amine hardener. It features fibrous extenders, providing a tough, flexible, and water-repellent coating.
Advoguard 3690 СТЕ
Advoguard CTE 3690 is a solvent-less coal tar epoxy. It is a two-pack, high-build coal tar epoxy cured with an amine hardener, containing fibrous extenders for toughness, flexibility, and water repellency.
Advowash 1211 Etch Primer
Advowash 1211 is a two-pack phosphoric acid-cured etch primer from Advance Paints. It is designed to provide excellent adhesion and flexibility on aluminium, galvanised iron, and light alloy surfaces, serving as a base for subsequent coating systems.
Advoguard 1130
Description goes here.
Advoguard 3390
Description goes here.
Advoguard 1250
Advoguard 1250 is a two-pack anti-corrosive primer, composed of epoxy resin and zinc phosphate pigment, designed for structural steel, pipelines, and metal surfaces in severe marine and industrial environments.
Advoguard 1160 HB
Description goes here.
Advoguard 2260
Advoguard 2260 HS is a high-solids, high-build epoxy intermediate coating containing Micaceous Iron Oxide. It is designed as an intermediate coat in high-performance coating systems to protect assets in marine and aggressive chemical environments.
Advamastic 1280
Advamastic 1280 is a high-solids, polyamide-cured epoxy coating designed for corrosion protection on both new and old rusty structures in marine and severe environments.
Advoguard 3660 СТЕ
Advoguard CTE 3660 is a two-pack rust-encapsulating coal tar epoxy. It is a coal tar epoxy cured with an amine hardener, featuring fibrous extenders that create a tough, flexible, and water-repellent coating.
Advothane 3345
Advothane 3345 is an two-component, acrylic polyurethane full-gloss coating and has a quick-drying coating known for excellent gloss, exterior durability, and resistance to gasoline, petroleum, and oils.
Advoguard 3345
Advoguard 3345 is a two-component polyamide-cured epoxy finish. It is designed for use on structural steel, pipelines, equipment, and storage tanks, offering excellent chemical resistance in severe chemical and marine environments.
Advashield Intumescent 611 FR and NCD-1478/2005
Advashield Intumescent 611 FR and NCD-1478/2005 is a single-pack, water-based fire-retardant paint formulated with vinyl acetate co-polymer emulsion, titanium dioxide, and specialized intumescence agents. It is primarily designed for use on Indian Naval ships and in parking areas.
Advolite FR White
Advance FR White is a single-pack, solvent-based fire retardant paint formulated with special resins and chemicals. It is designed for Indian Naval ships and conforming to JSS: 8010-72:2001.
Advotherm HR Aluminum (IS – 13183) Grade I
Advotherm HR Aluminum (IS – 13183) Grade I is a single-pack coating formulated with specialized heat-resistant polymers and aluminium flakes, designed for high-heat environments up to 600°C.
Advotherm HR Aluminum (IS-13183) Grade II
Description goes here.
Advotherm HHR 3160 Aluminium
Advotherm HHR 3160 is single-pack, a high heat-resistant coating formulated with silicone resin and aluminum flakes to protect steel surfaces in temperatures up to 600°C.
Advotherm HHR 3140
ADVOTHERM HHR 3140 is a single-pack, silicone-based coating formulated with aluminium flakes that helps protect steel surfaces operating at temperatures up to 400°C.
Advolite Aluminium HR 3125
Description goes here.
Advoguard 3360 HB PNE
Advoguard 3360 PNE is a high-build epoxy amine adduct cured coating designed for the interior of storage tanks, silos, and cargo-holds, this coating offers resistance to aliphatic and aromatic hydrocarbons, acids, alkalis, and ketonic solvents.
Advoguard 3370 PHE
Advoguard 3370 PHE is a highly cross-linked coating with high heat deflection temperature, designed to protect steel beneath thermal insulation in environments subject to wet and dry cycling.
Advoguard 3390 PE
Description goes here.
Cecri-Karaikudi System: 4 Coat Epoxy System
Advoguard 1255 CC
Advoguard 1255 CC is an epoxy-based concrete coating primer designed to enhance adhesion on concrete and sand-cement plastered surfaces. It is specifically designed for concrete bridges and structures situated in harsh chemical and marine environments.
Advoguard 2260 HS
Advoguard 2260 HS is a two-component, high-build epoxy intermediate coating containing Micaceous Iron Oxide. Designed for marine and aggressive chemical environments, it offers excellent resistance to saltwater, chemicals, petrol, and diesel.
Advoguard 3360 PDE
Advoguard 3360 PDE is a two-component, polyamide-cured epoxy finish designed for protecting steel structures, pipes, and concrete bridges in severe chemical and marine environments.
Advothane 3350
Advothane 3350 is a two-component coating with quick-drying properties, excellent UV durability, and resistance to wear, chemicals, gasoline, petroleum, and oils.
Epoxy Phenolic Interpenetrating Network (IP Net) System
Advoguard IP Net Primer
Advoguard IP NeT Primer is a non-pigmented, Epoxy-Phenolic Inter-Penetrating Network coating primer crosslinked with amine pre-polymer. It is designed to enhance adhesion by deeply penetrating concrete, complying with specifications set by the CBRI, Roorkee.
Advoguard IP Net Middle Coat
Advoguard IP Net Middle Coat is a two-component, epoxy phenolic-based high-build intermediate coating. It contains inert pigments and extenders, offers excellent chemical and solvent resistance, and complies with CBRI-Roorkee specifications.
Advothane IP Net Topcoat
Advothane IP Net Topcoat is a two-component, quick-drying coating known for excellent exterior durability, gloss retention, and resistance to wear, gasoline, oils, and petroleum.
Advamastic 1280 HB
Advamastic 1280 HB is a self-priming, polyamide-cured epoxy coating featuring excellent wetting and adhesion properties. It is designed to provide high corrosion resistance for new and old, rusty structures—including in marine environments—where abrasive or hydro-blasting is not feasible.
Advamastic 1280 XL MIO
Advamastic 1280 XL MIO is a high-build, two-pack, MIO-based surface-tolerant epoxy anti-corrosive coating. It is designed for protecting both new and old, rusty structures and equipment, particularly in marine and severe corrosive environments, and can be applied to manually cleaned surfaces.
Advothane 3360
Advothane 3360 is a polymer-based coating cured with aliphatic iso-cyanate, featuring high chemical, scratch, and mar resistance, along with UV protection.
Advotherm 3160 ZN Gr
Advotherm 3160 ZN Gr is a single-pack, high-heat-resistant primer designed to protect steel surfaces operating at temperatures up to 550°C. It is formulated with inorganic polymer and pigmented with zinc dust and inert graphite.
Advotherm 3160
Advotherm 3160 is a single-pack, silicone-based, high-heat resistant aluminum coating designed to protect steel surfaces in environments reaching temperatures up to 600°C.
Advotherm HR 3125
Advotherm HR 3125 is a two-pack, oleoresinous-based coating pigmented with aluminium flakes. It is designed to protect steel surfaces operating at temperatures up to 250°C.
Advoguard 3360 HB PDE
Advoguard 3360 HB PDE is a two-pack, high-performance coating formulated with modified epoxy resin and reinforced with lamellar and inert pigments. It is engineered to provide solvent and chemical resistance, specifically for protecting steel structures, oil rigs, and pipes in marine and highly corrosive conditions.
Advoguard 3660 CTE
Advoguard 3660 CTE is a two-pack, rust-encapsulating coal tar epoxy cured with an amine hardener. It utilizes fibrous extenders to create a tough, flexible, and water-repellent coating.
Galozinc 1185
Galozinc 1185 is a two-component, high-build inorganic zinc ethyl silicate primer designed for corrosion protection on steel surfaces. It contains 85% metallic zinc by weight in its dry film, meeting SSPC-Paint 20 Type-I Level-1 criteria.